Search for Automotive Industry

Allen Oil Conditioner

AOC Series

Industrial oil deteriorates over time due to solid particles from the machinery, absorption of moisture from the atmosphere or from condensation, and from contamination of hydrocarbon gases. The Allen Oil Conditioner is designed to purify a variety of industrial oils and prolong its useful life almost indefinitely. The AOC will remove all solid particles down to 5-micron, water down 5ppm or less, and all hydrocarbon gases.

Allen Hydroscav Oil Purifier

AHS Series

The self-contained Allen Hydroscav Oil Purifier system uses filtration and thermal dehydration to remove solids and moisture from almost all types of oil. The AHS will remove all solid particles down to 5-micron, water down 50ppm or less and hydrocarbon gases through C9. With a compact design, Allen Hydroscav Oil Purifiers allow for easy installation and accessibility of components for servicing.

Allen Coalescer-Separator

ACS Series

The Allen Coalescer-Separator system removes free and emulsified water down to the saturation level. The type of oil used, the kinds of additives in the oil, and the temperature of the oil determines the saturation level. For a typical ISO 32 turbine light oil at 100 °F, the saturation level is approximately 150 ppm. The complete Coalescer-Separator system consists of a pre-filter vessel, a coalescer-separator vessel, and an optional final filter.

Allen Continuous Filter System

ACM Series

The Allen Continuous Filter system is capable of removing various contaminants from lubricating oil, hydraulic oil, gear oil and many other fluids.

Allen Process Tank

APT Series

Allen Process Tanks are designed for economical oil reclaiming and storage.

Allen Portable Filter System - industrial fluid filtration systems

AVP Series

In-plant filtration of all types of oils and industrial fluids can be a literal lifesaver for your expensive equipment. In fact, routine fluid maintenance is one of the most inexpensive, yet effective, procedures you can perform in extending the life of your machinery and avoiding costly breakdowns. In addition, you reduce the ever increasing expense of purchasing new fluids.